Chair upholstery Dubai: dining chairs, armchairs and accent chairs
The Fabric Room handles chair upholstery in Dubai for single statement armchairs and full dining sets alike. We rebuild what is under the fabric as well as what you see, so seats feel firm and even again. Choose from our fabric library at home, agree a written specification, and get your chairs back on a fixed date.

What chair upholstery do we do in Dubai?
We reupholster almost any chair with a sound frame. The most common jobs are dining chair sets, armchairs, accent and occasional chairs, wingbacks, tub chairs, nursing chairs, desk chairs with upholstered seats, and bar or counter stools. We also make new upholstered chairs to order when you cannot find the right shape.
Chair reupholstery is usually worth it when the frame is solid timber and the joints are tight. A chair you love, an inherited piece or a set that matches your table is often far better value recovered than replaced, and you choose the exact fabric rather than taking what the shop has. If a joint is loose or a leg is cracked, we include the repair in the quote so the chair goes back stronger than it came.
Dining chair reupholstery: which type of seat do you have?
Dining chairs are built in a few distinct ways, and the type decides how much work is involved. Check yours against the table. We confirm it on the visit by looking under the seat.
| Seat type | How it is built | What reupholstery involves |
|---|---|---|
| Drop in seat | A padded board or frame that lifts out of the chair | New foam and fabric on the pad, quickest to do |
| Stuffed over seat | Padding and fabric wrap over the seat rails, often finished with braid or studs | Strip to the rails, new webbing, foam and fabric |
| Fully upholstered | Seat, back and sometimes arms all covered | Full strip, new padding throughout, pattern matched on the back |
| Loose seat pad | A separate cushion tied or fixed to a wood or cane seat | New foam insert and cover, see custom cushions |

Design it yourself first
Pick the piece, fabric and colour in The Fabric Room Design Studio, then send it to us for a price.
Armchair upholstery, rebuilt from the frame
An armchair takes more load than any other seat in the house, so armchair upholstery is more than a new cover. We strip the chair back to the frame and check every joint. Sagging seats usually come down to tired webbing or springs, so we replace the webbing, retie or replace springs where needed, and lay new high density seat foam, commonly 30 to 40 kg per cubic metre, with a fibre wrap for a smooth finish.
Then the details. We can keep the original shape exactly or change it: add or remove piping, add deep buttoning to a back, swap a skirt for exposed legs, or change the leg finish. Wingbacks and channel backed chairs need careful pattern placement so stripes and motifs run straight across the curves, and that is written into the specification before cutting starts.
Older armchairs sometimes hide horsehair, coir or coil springs under the fabric. Where these are still sound we can keep them and rebuild over the top, which preserves the original sit of a well made chair. Where they have collapsed we replace them with modern equivalents and tell you exactly what changed.

Upholstery fabric for dining chairs and armchairs
Choose chair fabric for how the chair is used. Dining chairs are sat on daily and meet food and drink, so we recommend a Martindale rating of 25,000 or more for heavy domestic use, and a performance fabric with a stain resistant finish for families. Occasional armchairs in a quiet room can take softer weaves from 15,000 for general domestic use.
Leather and faux leather suit dining chairs well because they wipe clean, though real leather needs conditioning in Dubai, where air conditioning dries the air. Velvet gives depth of colour but marks with pressure. Linen looks relaxed but creases. Near a sunny window, pick a fade resistant weave. Our upholstery fabric guide compares each option, and the fabrics page lists what we carry.
Upholstery ideas for dining chairs that work well: a contrast fabric on the back of the seat only, piping in a darker tone, decorative studs along the seat rail, or patterned fabric on the end chairs and plain on the rest.
How chair reupholstery works with The Fabric Room
We visit your home, look at each chair, take measurements and bring fabric samples. For a set we count the metres needed for the whole set plus pattern repeat, so every chair matches. You receive a written quote within 24 hours setting out the frame repairs, webbing, foam density, fabric and finish.
A 50% deposit books a fixed return date. We collect the chairs, and our craftspeople reupholster them to order in Dubai to the written specification. Every chair is inspected and photographed before it comes back, and our team returns them on the agreed day. The work carries our workmanship guarantee.
What drives the price? Mostly what sits under the fabric. A drop in seat that needs only new foam and cover is quick. A stuffed over seat that needs new webbing and springs takes far longer, as does any chair with buttoning, channels or a pattern to match across curves. For a set, the per chair price falls as the setup is shared. Our pricing page explains how we quote.
Why choose The Fabric Room for chair upholstery in Dubai
You get one written specification, one price and one date, with no surprises once the fabric comes off. We tell you before we start whether a chair is worth doing. For a full room, we can match chairs to a reupholstered sofa, a new ottoman or fresh scatter cushions.
Before deciding, read our guide to whether to reupholster. To see an armchair in a new fabric first, try it in the The Fabric Room Design Studio and send the design for a price, or book a home visit and we will bring the fabric library to you.
Between the souk and the showroom
Workshops are cheap but inconsistent. Showrooms sell catalogue pieces with long waits. The Fabric Room gives you design advice, made to order speed and one accountable team.
Measured in your home
A home visit with our fabric library. We measure, advise on proportion and comfort, and send a written quote within 24 hours.
Made to order in Dubai
Experienced Dubai craftspeople make every piece to our written specification for frame, foam density, stitching and pattern matching.
Inspected before it leaves
Every piece is checked against The Fabric Room standard and photographed. You see the photos before anything is delivered.
Fitted on a fixed date
Our team delivers and fits on the date agreed in writing. One point of contact from sample to fitting, with a written workmanship guarantee.
Five steps, one team
Send photos
WhatsApp a few photos and rough sizes, or send a design from the Design Studio. We reply within the hour in working hours.
Home visit
We measure, bring fabric samples and talk through comfort, foam and finish. Across Dubai, fee by area.
Written quote
A clear quote within 24 hours. A 50% deposit confirms the order and books your fitting date.
Made and checked
Made to order to our specification, inspected and photographed before delivery.
Fitted
Delivered and fitted on the agreed date, with a written workmanship guarantee.
Questions people ask
How much does chair upholstery cost in Dubai?
Price depends on the type of chair, how much needs rebuilding underneath, the fabric and quantity, and finishing such as piping, buttoning or studs. A drop in dining seat is a small job. A wingback rebuilt from the frame is a large one. We assess each chair at the home visit and send a written quote within 24 hours.
How many metres of fabric does a dining chair need?
A drop in seat usually needs well under a metre. A fully upholstered dining chair with a covered back needs noticeably more, and an armchair needs several metres. Large pattern repeats increase the quantity. We calculate the exact amount for your chairs and fabric on the visit, so you never buy too little.
Can I supply my own fabric for chair reupholstery?
Usually yes, as long as it is upholstery weight and suitable for seating. We check the fabric on the visit, including its Martindale rating, and tell you the quantity needed. If it is too light for a dining chair, we will say so before any work starts, so the result lasts.
Should I reupholster or buy new dining chairs?
Reupholster if the frames are solid timber, the joints are tight or easily repaired, and you like the shape. Replace if the frames are weak, flat pack or the chairs are uncomfortable. We give an honest view on the home visit, and we will not recommend work that is not worth it.
Can you change the style of my armchair?
Within the limits of the frame, yes. We can add or remove piping, add buttoning, swap a skirt for exposed legs, change the leg finish or reshape cushions. Structural changes, such as a different arm shape, depend on the frame and are discussed on the visit.
What fabric is best for dining chairs in a family home?
A performance fabric with a stain resistant finish and a Martindale rating of 25,000 or more is the safest choice. Faux leather and leather also wipe clean easily. Darker or patterned fabrics hide marks better than pale plains. We bring samples of each so you can compare them at home.
Guides for this service

Is It Worth Reupholstering a Sofa? A Dubai Guide
Is it worth reupholstering a sofa? Use our decision table, frame checks and Dubai advice to choose between sofa reupholstery.
READ
Best Fabric for Sofa Upholstery in Dubai
The best fabric for sofa upholstery in Dubai: Martindale rub counts, performance fabrics, linen, velvet, boucle and leather.
READRelated services

Reupholstery
Sofa reupholstery in Dubai: your frame stripped, rewebbed, refoamed and recovered in a fabric you choose at home. Written quote.
VIEW
Upholstery
Upholstery in Dubai for sofas, chairs, headboards and majlis seating. Home visit with a fabric library, written quote in 24.
VIEW
Foam replacement
Sofa foam replacement in Dubai: high density seat foam, softer backs, fibre or feather wraps, cut to your cushions and refitted.
VIEW